Simulation of particles dissolution in the shear flow: a combined concentration lattice Boltzmann and smoothed profile approach. (English) Zbl 1469.76079
Summary: In the present study, the combination of the Concentration Lattice Boltzmann Method and the Smoothed Profile Method (CLBM-SPM) was used to simulate the dissolution of circular particles between parallel plates moving in opposite directions. The hydrodynamics and fluid concentration simulation were performed based on the single relaxation time Lattice Boltzmann Method. LBM convection-diffusion equation was then used to solve the concentration of the solute in the fluid phase. Additionally, SPM was employed to apply the no-slip boundary condition at the solid-fluid interface and to calculate the concentration forces. Initially, the results of the numerical solution were compared with the ones presented in the literature. Then the effects of the initial solid volume fraction, the Schmidt number, the Reynolds number, and particle size were studied to examine the behavior of particles dissolution. The results showed that the smallest dissolution time in the systems with different volume fractions was in a one with the least solid volume fraction. As the volume fraction was increased, the solid-fluid mass transfer driving force was decreased in the system. Also, with the rise of the Schmidt number, the dissolution time was increased, due to the decrease of the diffusion coefficient of the fluid flow. Moreover, by increasing the Reynolds number, the time required for the volume fraction ratio to reach 0.05 of its initial value was reduced. Finally, the particle size in this system was studied. The results indicated that with the decrease in particle size (or increase in the surface area), we could significantly alter the dissolution time.
MSC:
| 76M28 | Particle methods and lattice-gas methods |
| 76T20 | Suspensions |
| 76R99 | Diffusion and convection |
Keywords:
circular particle; Reynolds number; Schmidt number; convection-diffusion equation; parametric investigationSoftware:
NATriuMReferences:
| [1] | Georgiev, K.; Kosturski, N.; Margenov, S.; Starý, J., On adaptive time stepping for large-scale parabolic problems: Computer simulation of heat and mass transfer in vacuum freeze-drying, J. Comput. Appl. Math., 226, 268-274 (2009) · Zbl 1166.80001 |
| [2] | Al-Rashed, M.; Wójcik, J.; Plewik, R.; Synowiec, P.; Kuś, A., Multiphase CFD modeling: Fluid dynamics aspects in scale-up of a fluidized-bed crystallizer, Chem. Eng. Process. Process. Intensif., 63, 7-15 (2013) |
| [3] | Borissova, A., General systems modeling of multi-phase batch crystallization from solution, Chem. Eng. Process. Process. Intensif., 48, 268-278 (2009) |
| [4] | Bai, G. E.; Armenante, P. M., Hydrodynamic, mass transfer, and dissolution effects induced by tablet location during dissolution testing, J. Pharm. Sci., 98, 1511-1531 (2009) |
| [5] | Yang, C.; Zhang, J.; Koch, D. L.; Yin, X., Mass/heat transfer from a neutrally buoyant sphere in simple shear flow at finite reynolds and peclet numbers, AIChE J., 57, 1419-1433 (2011) |
| [6] | Ye, D.; Bogner, R.; Li, J. Q.; Fan, T. H., Dissolution of a colloidal particle in an oscillatory flow, Int. J. Heat Mass Transfer, 107, 489-499 (2017) |
| [7] | Zhan, S.; Li, M.; Zhou, J.; Yang, J.; Zhou, Y., CFD Simulation of dissolution process of alumina in an aluminum reduction cell with two-particle phase population balance model, Appl. Therm. Eng., 73, 803-816 (2014) |
| [8] | Noyes, A. A.; Whitney, W. R., The rate of solution of solid substances in their own solution., J. Am. Chem. Soc., 19, 930-934 (1897) |
| [9] | Ladd, A. J., Numerical simulations of particulate suspensions via a discretized Boltzmann equation, part 1. theoretical foundation, J. Fluid Mech., 271, 285-309 (1994) · Zbl 0815.76085 |
| [10] | Aidun, C. K.; Clausen, J. R., Lattice-Boltzmann method for complex flows, Annu. Rev. Fluid Mech., 42, 439-472 (2010) · Zbl 1345.76087 |
| [11] | Campos, J. O.; Oliveira, R. S.; Dos Santos, R. W.; Rocha, B. M., Lattice Boltzmann method for parallel simulations of cardiac electrophysiology using GPUs, J. Comput. Appl. Math., 295, 70-82 (2016) · Zbl 1335.92046 |
| [12] | Kuznik, F.; Obrecht, C.; Rusaouen, G.; Roux, J. J., LBM Based flow simulation using GPU computing processor, Comput. Math. with Appl., 59, 2380-2392 (2010) · Zbl 1193.76112 |
| [13] | Krämer, A.; Wilde, D.; Küllmer, K.; Reith, D.; Foysi, H.; Joppich, W., Lattice Boltzmann simulations on irregular grids: Introduction of the NATriuM library, Comput. Math. with Appl. (2018) |
| [14] | Chen, Y. X.; Chang, S. C.; Young, W. B., Application of lattice Boltzmann method in free surface flow simulation of micro injection molding, Comput. Math. with Appl., 75, 2374-2386 (2018) · Zbl 1409.76111 |
| [15] | Sajjadi, H.; Salmanzadeh, M.; Ahmadi, G.; Jafari, S., Turbulent indoor airflow simulation using hybrid LES/RANS model utilizing Lattice Boltzmann method, Coumput. Fluid, 150, 66-73 (2017) · Zbl 1390.76214 |
| [16] | Chang, S. C.; Yang, Y. T.; Chen, C. K.; Chen, W. L., Application of the lattice Boltzmann method combined with large-eddy simulations to turbulent convective heat transfer, Int. J. Heat Mass Transfer, 66, 338-348 (2013) |
| [17] | Sajjadi, H.; Salmanzadeh, M.; Ahmadi, G.; Jafari, S., Investigation of particle deposition and dispersion using hybrid LES/RANS model based on lattice Boltzmann method, Sci. Iranica., 25, 3173-3182 (2018) |
| [18] | Bisht, M.; Patil, D. V., Power-law fluid flow in driven enclosures with undulation using MRT-lattice Boltzmann method, Comput. Math. with Appl. (2017) |
| [19] | Aghakhani, S.; Pordanjani, A.; Karimipour, A.; Abdollahi, A.; Afrand, M., Numerical investigation of heat transfer in a power-law non-Newtonian fluid in a C-Shaped cavity with magnetic field effect using finite difference lattice Boltzmann, Coumput. Fluid, 176, 51-67 (2018) · Zbl 1410.76013 |
| [20] | Karimipour, A.; Nezhad, A.; D’Orazio, A.; Esfe, M.; Safaei, M.; Shirani, E., Simulation of copper-water nanofluid in a microchannel in slip flow regime using the lattice Boltzmann method, Eur. J. Mech. B, 49, 89-99 (2015) |
| [21] | Espinoza-Andaluz, M.; Andersson, M.; Sundén, B., Computational time and domain size analysis of porous media flows using the lattice Boltzmann method, Comput. Math. Appl., 74, 26-34 (2017) · Zbl 1426.76597 |
| [22] | Karimipour, A.; Nezhad, A.; D’Orazio, A.; Shirani, E., Investigation of the gravity effects on the mixed convection heat transfer in a microchannel using lattice Boltzmann method, Int. J. Therm. Sci., 54, 142-152 (2012) |
| [23] | Safaei, M.; Karimipour, A.; Abdollahi, A.; Nguyen, T. K., The investigation of thermal radiation and free convection heat transfer mechanisms of nanofluid inside a shallow cavity by lattice Boltzmann method, Physica A, 509, 515-535 (2018) |
| [24] | Sajjadi, H.; Salmanzadeh, M.; Ahmadi, G.; Jafari, S., Simulations of indoor airflow and particle dispersion and deposition by the lattice Boltzmann method using LES and RANS approaches, Build. Environ., 102, 1-12 (2016) |
| [25] | Sajjadi, H.; Salmanzadeh, M.; Ahmadi, G.; Jafari, S., Lattice Boltzmann method and RANS approach for simulation of turbulent flows and particle transport and deposition, Particuology., 30, 62-72 (2017) |
| [26] | Jia, X.; Williams, R. A., A hybrid mesoscale modelling approach to dissolution of granules and tablets, Chem. Eng. Res. Des., 85, 1027-1038 (2007) |
| [27] | Liu, M.; Mostaghimi, P., High-resolution pore-scale simulation of dissolution in porous media, Chem. Eng. Sci., 161, 360-369 (2017) |
| [28] | Wang, L.; Wu, C.; Ge, W., Effect of particle clusters on mass transfer between gas and particles in gas-solid flows, Powder Technol., 319, 221-227 (2017) |
| [29] | Bouzidi, M.; Firdaouss, M.; Lallemand, P., Momentum transfer of a Boltzmann-lattice fluid with boundaries, Phys. Fluids, 13, 3452-3459 (2001) · Zbl 1184.76068 |
| [30] | Feng, Z. G.; Michaelides, E. E., The immersed boundary-lattice Boltzmann method for solving fluid-particles interaction problems, J. Comput. Phys., 195, 602-628 (2004) · Zbl 1115.76395 |
| [31] | Goldstein, D.; Handler, R.; Sirovich, L., Modeling a no-slip flow boundary with an external force field, J. Comput. Phys., 105, 354-366 (1993) · Zbl 0768.76049 |
| [32] | Niu, X. D.; Shu, C.; Chew, Y. T.; Peng, Y., A momentum exchange-based immersed boundary-lattice Boltzmann method for simulating incompressible viscous flows, Phys. Lett. Sect. A Gen. At. Solid State Phys., 354, 173-182 (2006) · Zbl 1181.76111 |
| [33] | Kim, Y.; Peskin, C. S., Penalty immersed boundary method for an elastic boundary with mass, Phys. Fluids, 19, Article 053103 pp. (2007) · Zbl 1146.76441 |
| [34] | Derksen, J.; Reynolds, G.; Crampton, A.; Huang, Z. H.; Booth, J., Simulations of dissolution of spherical particles in laminar shear flow, Chem. Eng. Res. Des., 93, 66-78 (2015) |
| [35] | Nakayama, Y.; Yamamoto, R., Simulation method to resolve hydrodynamic interactions in colloidal dispersions, Phys. Rev. E, 71, Article 036707 pp. (2005) |
| [36] | Jafari, S.; Yamamoto, R.; Rahnama, M., Lattice-Boltzmann method combined with smoothed-profile method for particulate suspensions, Phys. Rev. E, 83, Article 026702 pp. (2011) |
| [37] | Nakayama, Y.; Kim, K.; Yamamoto, R., Direct simulation of flowing colloidal dispersions by smoothed profile method, Adv. Powder Technol., 21, 206-211 (2010) |
| [38] | Liu, C.; Lin, K.; Mai, H.; Lin, C., Thermal boundary conditions for thermal lattice Boltzmann simulations, Comput. Math. Appl., 59, 2178-2193 (2010) · Zbl 1193.80027 |
| [39] | Kang, S. K.; Hassan, Y. A., A direct-forcing immersed boundary method for the thermal lattice Boltzmann method, Comput. Fluids, 49, 36-45 (2011) · Zbl 1271.76265 |
| [40] | Ren, W. W.; Shu, C.; Wu, J.; Yang, W. M., Boundary condition-enforced immersed boundary method for thermal flow problems with dirichlet temperature condition and its applications, Comput. Fluids, 57, 40-51 (2012) · Zbl 1365.76199 |
| [41] | Zhang, H.; Yuan, H.; Trias, F. X.; Yu, A.; Tan, Y.; Oliva, A., Particulate immersed boundary method for complex fluid-particle interaction problems with heat transfer, Comput. Math. Appl., 71, 391-407 (2016) · Zbl 1443.76189 |
| [42] | Hu, Y.; Li, D.; Shu, S.; Niu, X., An efficient smoothed profile-lattice Boltzmann method for the simulation of forced and natural convection flows in complex geometries, Int. Commun. Heat Mass Transf., 68, 188-199 (2015) |
| [43] | Bhatnagar, P. L.; Gross, E. P.; Krook, M., A model for collision processes in gases, I. Small amplitude processes in charged and neutral one-component systems, Phys. Rev., 94, 511-525 (1954) · Zbl 0055.23609 |
| [44] | Guo, Z.; Zheng, C.; Shi, B., Discrete lattice effects on the forcing term in the lattice Boltzmann method, Phys. Rev. E, 65, 6 (2002) · Zbl 1244.76102 |
| [45] | Mohamad, A. A.; Kuzmin, A., A critical evaluation of force term in lattice Boltzmann method, natural convection problem, Int. J. Heat Mass Transfer, 53, 990-996 (2010) · Zbl 1406.76073 |
| [46] | Tao, S.; Hu, J.; Guo, Z., An investigation on momentum exchange methods and refilling algorithms for lattice Boltzmann simulation of particulate flows, Comput. Fluids, 133, 1-14 (2016) · Zbl 1390.76771 |
| [47] | Feng, J.; Hu, H. H.; Joseph, D. D., Direct simulation of initial value problems for the motion of solid bodies in a Newtonian fluid, Part 2. Couette and Poiseuille flows, J. Fluid Mech., 277, 271-301 (1994) · Zbl 0876.76040 |
| [48] | Frankel, N. A.; Acrivos, A., Heat and mass transfer from small spheres and cylinders freely suspended in shear flow, Phys. Fluids, 11, 1913-1918 (1968) · Zbl 0182.28401 |
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.
