×

The drag and lift characteristics of flow around a circular cylinder with a slit. (English) Zbl 1473.76023

Summary: Flow past a circular cylinder with a slit results in local perturbation, which affects the flow pattern, vortex shedding and the aerodynamic forces. This study uses spectral element method to simulate flow past a cylinder with a normal slit or an inclined slit at Reynolds numbers of Re=100 to 500. For a cylinder with a normal slit, the drag and amplitude of the oscillating lift both increase as the width of the slit increases. There are two modes for a cylinder with an inclined slit: an injection mode and a blowing/suction mode. The drag also increases as the angle of inclination of the slit increases and is greater than that for a cylinder that has no slit for flow in the blowing/suction mode, except at low Reynolds numbers, such as Re=100. Increasing the width of slit or the angle of inclination of the slit increases the frequency of vortex shedding. However, a wider slit or larger angle of inclination also results in additional drag. There is a similarity between the external surface and the slit in that the aerodynamic forces due to pressure or shear stress vary with the angle of inclination of the slit.

MSC:

76D25 Wakes and jets
76D17 Viscous vortex flows
76M22 Spectral methods applied to problems in fluid mechanics
Full Text: DOI

References:

[1] Igarashi, T., Flow characteristics and a circular cylinder with a slit. 1st report, flow control and flow patterns, Bull. JSME, 21, 154, 656-664 (1978)
[2] Olsen, J. F.; Rajagopalan, S., Vortex shedding behind modified circular cylinders, J. Wind Eng. Ind. Aerodyn., 86, 55-63 (2000)
[3] Ma, H.-L.; Kuo, C.-H., Control of boundary layer flow and lock-on of wake behind a circular cylinder with a normal slit, Eur. J. Mech. B Fluids, 59, 99-114 (2016) · Zbl 1408.76243
[4] Yang, J. W.; He, Y.; Bao, F., Large eddy stimulation and experimental measurement of near wake structures of a slotted circular cylinder, Acta Aerodyn. Sin., 32, 3, 308-314 (2014)
[5] Kuo, C.-H.; Lin, H.-W.; Chai, C.-T.; Cheng, F., Flow characteristics around circular cylinders with a normal slit, Defect Diffus. Forum, 379, 48-57 (2017)
[6] Baek, H.; Karniadakis, G. E., Suppressing vortex-induced vibrations via passive means, J. Fluids Struct., 25, 848-866 (2009)
[7] Sheng, W. J.; Chen, W., Features of flow past a circular cylinder with a slit, Sci. Iran. B, 23, 5, 2097-2112 (2016)
[8] Ordia, L.; Venugopal, A.; Agrawal, A.; Prabhu, S. V., Vortex shedding characteristics of a cylinder with a parallel slit placed in a circular pipe, J. Vis., 20, 263-275 (2017)
[9] Gao, D.-L.; Chen, W.-L.; Li, H.; Hu, H., Flow around a circular cylinder with slit, Exp. Therm Fluid Sci., 82, 287-301 (2017)
[10] Popiel, C. O., Vortex shedding from a circular cylinder with a slit and concave rear surface, Appl. Sci. Res., 51, 209-215 (1993)
[11] Turner, J. T.; Popiel, C. O.; Robinson, D. I., Evolution of an improved vortex generator, Flow Meas. Instrum., 4, 4, 249-258 (1993)
[12] Igarashi, T., Flow resistance and strouhal number of a vortex shedder in a circular pipe, JSME Int. J. B, 42, 4, 586-595 (1999)
[13] Peng, B. H.; Miau, J. J.; Bao, F.; Weng, L. D.; Chao, C. C.; Hsu, C. C., Performance of vortex shedding from a circular cylinder with a slit normal to the stream, Flow Meas. Instrum., 25, 54-62 (2012)
[14] Orszag, S. A.; Kells, L. C., Transition to turbulence in plane poiseuille and plane couette flow, J. Fluid Mech., 96, 159-205 (1980) · Zbl 0418.76036
[15] Hsu, L.-C.; Ye, J.-Z., Numerical study of flow patterns in a tandem array cylinder system, Int. J. Appl. Mech., 7, 3, 35 (2015), 1550034
[16] Hsu, L.-C.; Gao, G.-J., Simulation of vortex shedding behind a flat plate with vorticity based adaptive spectral element method, Math. Probl. Eng., 2014, 17 (2014), Article ID 959615
[17] Hsu, L.-C.; Ye, J.-Z.; Hsu, C.-H., Simulation of flow past a cylinder with adaptive spectral element method, J. Mech., 33, 2, 235-245 (2017)
[18] Park, J.; Kwon, K.; Choi, H., Numerical solutions of flow past a circular cylinder at Reynolds numbers up to 160, KSME Int. J., 12, 6, 1200-1205 (1988)
[19] Igarashi, T., Flow characteristics and a circular cylinder with a slit. 2nd report, effect of boundary sunction, Bull. JSME, 25, 207, 1389-1397 (1982)
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.