Numerical study of a vortex-induced vibration technique for passive heat transfer enhancement in internal turbulent flow. (English) Zbl 1408.74050
Summary: Due to many applications in engineering, the study of the vortex-induced vibration is of great importance. In the present study, a passive heat transfer enhancement technique for turbulent flow through the channel with constant wall temperature at \(\operatorname{Re}_D = 1000\) (based on the cylinder diameter) is studied. A flexible plate is attached to the stationary cylinder and the numerical analysis are carried out over a wide range of solid and fluid parameters such as density ratio (2.54–127), dimensionless Young’s modulus (1.1–11\(\times10^6\)), Reynolds number (300–1000), Prandtl Number (6.8 and 68), velocity and temperature profiles. As a result, although the variation of natural frequency by density and Young’s modulus of the plate alters the frequency and amplitude of oscillation, the performance evaluation criteria (PEC) number does not change. The velocity profile has a significant effect on increasing heat transfer rate and PEC number while the temperature profile only increases heat transfer without any change in the PEC number. Similar numerical analysis for the case without the flexible plate is also carried out and compared to that with a flexible plate. The results show that adding the flexible plate behind the stationary cylinder decreases the amplitude of lift coefficient by 86%, the frequency of vortex shedding by 35.8%, and the total pressure loss by 31.1%. The average Nusselt number is also improved by 2.3% and eventually, PEC increases by 23%.
MSC:
| 74S05 | Finite element methods applied to problems in solid mechanics |
| 76M10 | Finite element methods applied to problems in fluid mechanics |
| 76D05 | Navier-Stokes equations for incompressible viscous fluids |
| 74F10 | Fluid-solid interactions (including aero- and hydro-elasticity, porosity, etc.) |
Keywords:
vortex-induced vibration; fluid-structure interaction; vortex shedding; flexible plate; heat transfer; performance evaluation criteriaReferences:
| [1] | Bergles, A. E.; Rohsenow, W. M.; Hartnet, J. P., Techniques to augment heat transfer, (1985), McGraw-Hill New York |
| [2] | Chen, J. D.; Hsieh, S. S., Assessment study of longitudinal rectangular plate inserts as tubeside heat transfer augmentative devices, Int. J. Heat Mass Transfer, 34, 2545-2553, (1991) |
| [3] | Chen, J. D.; Hsieh, S. S., Buoyancy effect on laminar forced convection in a horizontal tube with a longitudinal plate insert, Int. J. Heat Mass Transfer, 35, 263-267, (1992) |
| [4] | Valencia, A., Heat transfer enhancement in a channel with a built-in rectangular cylinder, Int. J. Heat Mass Transfer, 30, 423-427, (1995) |
| [5] | Hung, C. I.; Lin, Y. S.; Chen, J. D., Numerical study of heat transfer enhancement of a horizontal tube with an eccentrically inserted plate, Int. J. Heat Mass Transfer, 40, 1687-1692, (1997) · Zbl 0925.76710 |
| [6] | Chatterjee, D.; Mondal, B., Forced convection heat transfer from an equilateral triangular cylinder at low Reynolds numbers, Int. J. Heat Mass Transfer, 48, 1575-1587, (2012) |
| [7] | Rayleigh, L., Instability of jets, London, 10, 4-13, (1879) · JFM 11.0685.01 |
| [8] | Taneda, S., Waving motion of flags, J. Phys., 24, 392-401, (1968) |
| [9] | Belytschko, T.; Mullen, R., Stability of explicit-implicit mesh partitions in time integration, Internat. J. Numer. Methods Engrg., 12, 1575-1586, (1978) · Zbl 0398.65059 |
| [10] | Belytschko, T.; Yen, T.; Mullen, R., Mixed methods for time integration, J. Comput. Method Appl. Mech. Eng., 17, 259-270, (1979) · Zbl 0403.73002 |
| [11] | Hughes, T. J.R.; Liu, W. K., Implicit-explicit finite elements in transient analysis, J. Appl. Mech., 45, 371-378, (1978) · Zbl 0392.73076 |
| [12] | Hughes, T. J.R.; Pister, K. S.; Taylor, R. L., Implicit-explicit finite elements in nonlinear transient analysis, Comput. Methods Appl. Mech. Engrg., 17, 159-182, (1979) · Zbl 0413.73074 |
| [13] | Felippa, C. A.; Park, K. C., Staggered transient analysis procedures for coupled-field mechanical system, Comput. Methods Appl. Mech. Engrg., 24, 61-111, (1980) · Zbl 0453.73091 |
| [14] | Park, K. C.; Felippa, C. A., Partitioned transient analysis procedures for couple-field problems, J. Appl. Mech., 47, 919-926, (1980) · Zbl 0462.73066 |
| [15] | Park, K. C.; Felippa, C. A.; Deruntz, J. A., Stabilization of staggered solution procedures for fluid-structure interaction analysis, Comput. Methods Fluid-Struct. Interact. Probl., 26, 95-124, (1977) · Zbl 0389.76002 |
| [16] | Turek, S.; Hron, J., Proposal for numerical benchmarking of fluid-structure interaction between an elastic object and a laminar incompressible flow, (Lecture Notes in Computer Science and Engineering, (2006), Springer Verlag) · Zbl 1323.76049 |
| [17] | Lee, J.; You, D., Study of vortex-shedding-induced vibration of a flexible splitter plate behind a cylinder, J. Phys. Fluids, 25, (2013) |
| [18] | Nayer, G. D.; Kalmbach, A.; Breuer, M.; Sicklinger, S.; Wuchner, R., Flow past a cylinder with a flexible splitter plate: A complementary experimental-numerical investigation and a new FSI test case (FSI-PFS-1a), J. Comput. Fluids, 99, 18-43, (2014) |
| [19] | Shi, J.; Hu, J.; Schafer, S. R.; Chen, C. L., Numerical study of heat transfer enhancement of channel via vortex-induced vibration, J. Appl. Therm. Eng., 70, 838-845, (2014) |
| [20] | Soti, A. K.; Bhardwaj, R.; Sheridan, J., Flow-induced deformation of a flexible thin structure as manifestation of heat transfer enhancement, Int. J. Heat Mass Transfer, 84, 1070-1081, (2015) |
| [21] | Lienhard, J., Synopsis of lift, drag and vortex frequency data for rigid circular cylinder, (1966), College of engineering, Washington state university |
| [22] | Bejan, A., Convection heat transfer, (2004), John Wiley USA |
| [23] | Rahman, M. M.; Karim, M. M.; Alim, M. M., Numerical investigation of unsteady flow past a circular cylinder using 2-d finite volume method, J. Naval Archit. Mar. Eng., 4, 27-42, (2007) |
| [24] | F.R. Menter, Zonal two equation k-omega the turbulence models for aerodynamic flows, AIAA. pressure, in: The Proceedings of the 24th Fluid Dynamics Conference, 1993, pp: 93-2906.; F.R. Menter, Zonal two equation k-omega the turbulence models for aerodynamic flows, AIAA. pressure, in: The Proceedings of the 24th Fluid Dynamics Conference, 1993, pp: 93-2906. |
| [25] | Dunne, T.; Rannacher, R., Adaptive finite element approximation of fluid-structure interaction based on an Eulerian variational formulation, (Bungartz, H.-J.; Schaefer, M., Lecture Notes in Computer Science and Engineering, (2006), Springer Verlag) · Zbl 1323.74082 |
| [26] | Souli, M.; Benson, D. J., Arbitrary Lagrangian-Eulerian and fluid-structure interaction: numerical simulation, (2010), John Wiley London |
| [27] | Donea, J.; Huert, A.; Pontho, J. Ph.; Rodriguez-Ferran, A., Arbitrary Lagrangian-Eulerian methods, encyclopedia of computational mechanics, (2004), John Wiley |
| [28] | Noh, W. F., CEL: A time-dependent two-space dimensional coupled eulerian-Lagrangian code, Methods Comput. Phys., 3, 117, (1964) |
| [29] | Franck, R. M.; Lazarus, R. B., (Mixed Eulerian-Lagrangian Method, Methods in Computational Physics, Fundamental Methods in Hydrodynamic, vol. 3, (1964)) |
| [30] | Hirt, C. W.; Amsden, A. A.; Cook, J. L., An arbitrary Lagrangian-Eulerian computing method for all flow speeds, J. Comput. Phys., 14, 227-253, (1974) · Zbl 0292.76018 |
| [31] | J. Donea, P. Fasoli-Stella, S. Giuliani, Lagrangian and Eulerian finite element techniques for transient fluid-structure interaction problems, in: Trans. 4th Int. Conf. on Structural Mechanics in Reactor Technology, San Francisco, California, USA, 1977, Paper B1/2.; J. Donea, P. Fasoli-Stella, S. Giuliani, Lagrangian and Eulerian finite element techniques for transient fluid-structure interaction problems, in: Trans. 4th Int. Conf. on Structural Mechanics in Reactor Technology, San Francisco, California, USA, 1977, Paper B1/2. |
| [32] | Belytschko, T.; Kennedy, J. M.; Schoeberle, D. F., Quasi-Eulerian finite element formulation for fluid-structure interaction, (Proc. Joint ASME/CSME Pressure Vessels and Piping Conference, (1978), ASME) |
| [33] | T.J.R Hughes, W.K. Liu, T.K. Zimmermann, Lagrangian-Eulerian Finite Element Formulation for Incompressible Viscous Flows, U.S.-Japan Seminar on Interdisciplinary Finite Element Analysis, Ithaca, NY, 1978.; T.J.R Hughes, W.K. Liu, T.K. Zimmermann, Lagrangian-Eulerian Finite Element Formulation for Incompressible Viscous Flows, U.S.-Japan Seminar on Interdisciplinary Finite Element Analysis, Ithaca, NY, 1978. |
| [34] | John, H., Synopsis of lift, drag and vortex frequency data for rigid circular cylinder, technical extension service, (1966), Washington State University |
| [35] | Tritton, D. J., Experiments on the flow around a circular cylinder at low Reynolds number, J. Fluid Mech., 6, 547, (1959) · Zbl 0092.19502 |
| [36] | Eckert, E. R.G.; Soehngen, E., Distribution of heat transfer coefficients around circular cylinders in cross flow at Reynolds number from 20 to 500, ASME, 74, 343-347, (1952) |
| [37] | Baranyi, L., Computation of unsteady momentum and heat transfer from a fixed circular cylinder in laminar flow, J. Appl. Mech., 4, 13-25, (2003) · Zbl 1026.80001 |
| [38] | Lange, C. F.; Durst, F.; Breuer, M., Momentum and heat transfer from cylinder in laminar cross flow at 0.0001\(<\)re\(<\)200, Int. J. Heat Mass Transfer, 41, 3409-3430, (1998) · Zbl 0918.76012 |
| [39] | Karniadakis, G. E., Numerical simulation of forced convection heat transfer from a cylinder in cross flow, Int. J. Heat Mass Transfer, 31, 107-118, (1988) |
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.
