South Australian Railways C class

The South Australian Railways C class locomotives were built by the Robert Stephenson and Company for the South Australian Railways in 1856. The first locomotive (no. 5) was in service by November 1856; the second (no. 6) by January 1857. They were both withdrawn after long service lives, with no. 5 being withdrawn after 50 years working on the SAR. No. 6 lasted well into Commissioner Webb's era, being withdrawn in 1926 at almost 70 years old.[1]

South Australian Railways C Class
South Australian Railways C class locomotive no. 6
Type and origin
Power typeSteam
BuilderRobert Stephenson and Company
Order number1045, 1046
Build date1856
Total produced2
RebuilderIslington Railway Workshops
Rebuild date1884 (no. 5), 1885 & 1914 (no. 6)
Number rebuilt2
Specifications
Configuration:
 • Whyte2-4-0
 • UIC1′B 3
Gauge1600 mm (5 ft 3 in)
Driver dia.4 ft 6 in (1372 mm)
Length42 ft 10 in (13.06 m)
Width7 ft 6 in (2286 mm) over running boards
Height12 ft 8 in (3861 mm)
Frame typePlate
Axle load9 long tons 9 cwt (9.6 t)
Total weight42 long tons 1 cwt (42.7 t)
Fuel typeCoal
Fuel capacity3 long tons 15+34 cwt (3.85 t)
Water cap.1060 imp gal (4800 L; 1270 US gal)
Firebox:
 • Grate area12.71 sq ft (1.181 m2)
Boiler pressure130 lbf/in2 (0.90 MPa)
Heating surface:
 • Firebox73.1 sq ft (6.79 m2)
 • Tubes780 sq ft (72 m2)
CylindersTwo
Cylinder size14 in × 20 in (356 mm × 508 mm)
Performance figures
Tractive effort
  • Original: 7548 lbf (33.58 kN)
  • As rebuilt: 8021 lbf (35.68 kN)
Career
OperatorsSouth Australian Railways
ClassC
Number in class2
Numbers5 & 6
First runNovember 1856
Withdrawn1906, 1926
DispositionAll scrapped

History

edit

After the South Australian Railways had its new B class tank engines built to run on the railway line to Gawler, two more locomotives were purchased to also run this service on the lightly engineered line. These locomotives were designated the "C class". Their range was increased to include stops at Roseworthy and Kapunda following the opening of the new line extension in August 1860. The C class was later used in constructing the Tarlee line. In 1884 and 1885, both locomotives were rebuilt and put back into traffic, having acquired new cabs which were complete with circular front and side windows.

The C class worked on the northern lines until they were superseded by more powerful locomotives. No. 5 was condemned in 1906 at the age of 50 years; no. 6 continued to work on the suburban system and performed shunting duties at Mile End and Port Adelaide, eventually being withdrawn and scrapped in 1926 after 70 years of service.[2][3]

References

edit
  1. ^ Turner, Jim (1998). Early Australian steam locomotives 1855-1895. South Australia: Kangaroo Press. p. 112. ISBN 0-86417-875-1.
  2. ^ Fluck, R. E.; Sampson, R.; Bird, K. J. (1986). Steam locomotives and railcars of the South Australian Railways. South Australia: Mile End Railway Museum (S.A.) Inc. pp. 40–41. ISBN 0959-5073-37.
  3. ^ Drymalik, Chris. "Broad Gauge C-class 2-4-0 locomotives". Chris's Commonwealth Railways Information (ComRails). Retrieved 30 July 2019.