×

A new iterative identification method for damping control of power system in multi-interference. (English) Zbl 1441.93191

Summary: In this paper, we consider the closed-loop model of a power system in a multi-interference environment. For a multi-interference power system, the closed-loop identification is a difficult task. Yet, the model identification error can degrade the effect of the damping control. This could lead to instability of the power grid. Thus, for the closed-loop identification, we propose an iterative online identification algorithm based on the recursive least squares method and the v-gap distance. The convergence of the algorithm is proved by using direct method. The proposed algorithm is applied to the New England system, for which the results obtained are compared with those obtained using the prediction error method and the Runge-Kutta method. From the simulation study being carried out on the IEEE 39-bus New England system, we observe that by using the iterative identification algorithm proposed in this paper, the output response time is reduced by about half when compared with those obtained by using the prediction error method and the Runge-Kutta method. Also, the number of oscillations in the output response is less. These clearly indicate that the algorithm proposed can effectively suppress low frequency oscillation. As for the amplitudes of the output responses produced by the three methods, they are basically the same.

MSC:

93C80 Frequency-response methods in control theory
93A15 Large-scale systems
Full Text: DOI

References:

[1] H. K. Abdulkhader; J. Jacob; A. T. Mathew, Fractional-order lead-lag compensator-based multi-band power system stabiliser design using a hybrid dynamic GA-PSO algorithm, IET Gener. Tran. and Distr., 12, 1515-1521 (2018)
[2] P. Albertos and A. Sala, Iterative Identification and Control: Advances in Theory and Applications, Springer-Verlag, New York, 2002. · Zbl 1001.00013
[3] X. H. Bu; Z. S. Hou, Adaptive iterative learning control for linear systems with binary-valued observations, IEEE Trans. on Neur. Net. and Lear. Syst., 29, 232-237 (2018) · doi:10.1109/TNNLS.2016.2616885
[4] X. M. Chen; G. R. Guo, The convergence analysis of the WCE iterative algorithm, J. Natl. Univ. of Def. Tech., 3, 16-25 (1986)
[5] M. Darabian; A. Jalilvand, Designing a wide area damping controller to coordinate FACTS devices in the presence of wind turbines with regard to time delay, IET Rene. Power Gener., 12, 1523-1534 (2018) · doi:10.1049/iet-rpg.2017.0602
[6] Z. L. Deng; X. H. Qin; M. B. Zhang, Frequency-domain analysis of robust monotonic convergence of norm-optimal iterative learning control, IEEE Trans. on Contr. Syst. Tech., 26, 637-651 (2018)
[7] L. Q. Dou; Q. Zong; Z. S. Zhao; Y. H. Ji, Iterative identification and control design with optimal excitation signals based on v-gap, Sci. in China, 52, 1120-1128 (2009) · Zbl 1182.93039
[8] R. Goldoost-Soloot; Y. Mishra; G. Ledwich, Wide-area damping control for inter-area oscillations using inverse filtering technique, IET Gener. Tran. and Distr., 9, 1534-1543 (2015) · doi:10.1049/iet-gtd.2015.0027
[9] Q. Guo, The Iterative Methods to Solve Systems of Nonlinear Equations, Ph.D thesis, Hefei University of Technology in Anhui Province, 2015.
[10] Z. X. Liu, Y. Z. Sun, X. Li, B. Song, Z. S. Liu and F. M. Feng, Wide-area damping control system in China Southern Power Grid and its operation analysis, Auto. Electric. Power Syst., 38 (2014), 152-159 and 183.
[11] K. Liu; Y. M. Zhang; X. Y. Li; R. Jiang; Q. Zeng, Design of VSC-HVDC bilateral fuzzy logic reactive power damping controller based on oscillation transient energy decrease, Power Syst. Tech., 40, 1030-1036 (2016)
[12] W. C. Meng; X. Y. Wang; B. Fan; Q. M. Yang; I. Kamwa, Adaptive nonlinear neural control of wide-area power systems, IET Gener. Tran. and Distr., 11, 4531-4536 (2017)
[13] D. H. Owens; K. Feng, Parameter optimization in iterative learning control, Int. J. Contr., 76, 1059-1069 (2003) · Zbl 1064.93014 · doi:10.1080/0020717031000121410
[14] D. Rimorov; A. Heniche; I. Kamwa; S. Babaei; G. Stefopolous; B. Fardanesh, Dynamic performance improvement of New York state power grid with multi-functional multi-band power system stabiliser-based wide-area control, IET Gener. Tran. and Distr., 11, 4537-4545 (2017) · doi:10.1049/iet-gtd.2017.0288
[15] X. Ruan; Z. Z. Bien; Q. Wang, Convergence characteristics of proportional-type iterative learning control in the sense of Lebesgue-p norm, IET Contr. Theory and Appl., 6, 707-714 (2012) · doi:10.1049/iet-cta.2010.0388
[16] G. Sebastian; Y. Tan; D. Oetomo; I. Mareels, Feedback-based iterative learning design and synthesis with output constraints for robotic manipulators, IEEE Contr. Syst. Lett., 2, 513-518 (2018) · doi:10.1109/LCSYS.2018.2842186
[17] Y. Shen; W. Yao; J. Y. Wen; H. B. He, Adaptive wide-area power oscillation damper design for photovoltaic plant considering delay compensation, IET Gener. Tran. and Distr., 11, 4511-4519 (2017) · doi:10.1049/iet-gtd.2016.2057
[18] T. D. Son; G. Pipeleers; J. Swevers, Robust monotonic convergent iterative learning control, IEEE Trans. on Automat. Contr., 61, 1063-1068 (2016) · Zbl 1359.93258 · doi:10.1109/TAC.2015.2457785
[19] F. Z. Song; Y. Liu; J. X. Xu; X. F. Yang; P. He; Z. L. Yang, Iterative learning identification and compensation of space-periodic disturbance in PMLSM systems with time delay, IEEE Trans. on Ind. Electron., 65, 7579-7589 (2018) · doi:10.1109/TIE.2017.2777387
[20] C. Wu, Identification of Dominant Dynamic Characteristics of Power System Based on Ambient Signals, Ph.D thesis, Tsinghua University in Beijing, 2010.
[21] C. Zhang; D. Shen, Zero-error convergence of iterative learning control based on uniform quantisation with encoding and decoding mechanism, IET Contr. Theory and Appl., 12, 1907-1915 (2018) · doi:10.1049/iet-cta.2017.0919
[22] S. Zhu; X. J. Wang; H. Liu, Observer-based iterative and repetitive learning control for a class of nonlinear systems, IEEE/CAA J. Autom. Sinica, 5, 990-998 (2018) · doi:10.1109/JAS.2017.7510463
[23] H. Zhang; M. Gou, Convergence analysis of compressive sensing based on SCAD iterative thresholding algorithm, Chinese J. Eng. Math., 33, 243-258 (2016) · Zbl 1363.94036
This reference list is based on information provided by the publisher or from digital mathematics libraries. Its items are heuristically matched to zbMATH identifiers and may contain data conversion errors. In some cases that data have been complemented/enhanced by data from zbMATH Open. This attempts to reflect the references listed in the original paper as accurately as possible without claiming completeness or a perfect matching.