Abstract
An edge-based smoothed finite element method (ES-FEM) using triangular elements was recently proposed to improve the accuracy and convergence rate of the existing standard finite element method (FEM) for the elastic solid mechanics problems. In this paper, the ES-FEM is extended to more complicated visco-elastoplastic analyses using the von-Mises yield function and the Prandtl–Reuss flow rule. The material behavior includes perfect visco-elastoplasticity and visco-elastoplasticity with isotropic and linear kinematic hardening. The formulation shows that the bandwidth of stiffness matrix of the ES-FEM is larger than that of the FEM, and hence the computational cost of the ES-FEM in numerical examples is larger than that of the FEM for the same mesh. However, when the efficiency of computation (computation time for the same accuracy) in terms of a posteriori error estimation is considered, the ES-FEM is more efficient than the FEM.
Similar content being viewed by others
References
Bordas S, Rabczuk T, Nguyen-Xuan H, Nguyen Vinh P, Natarajan S, Bog T, Do Minh Q, Nguyen Vinh H (2009) Strain smoothing in FEM and XFEM. Comput Struct. doi:10.1016/j.compstruc.2008.07.006
Carstensen C, Klose R (2002) Elastoviscoplastic finite element analysis in 100 lines of matlab. J Numer Math 10: 157–192
Carstensen C, Funken SA (2001) Averaging technique for FE-a posteriori error control in elasticity. Part 1: conforming FEM. Comput Methods Appl Mech Eng 190: 2483–2498
Chen JS, Wu CT, Yoon S, You Y (2001) A stabilized conforming nodal integration for Galerkin meshfree method. Int J Numer Methods Eng 50: 435–466
Cui XY, Liu GR, Li GY, Zhao X, Nguyen-Thoi T, Sun GY (2008) A smoothed finite element method (SFEM) for linear and geometrically nonlinear analysis of plates and shells. CMES-Comput Model Eng Sci 28(2): 109–125
Dai KY, Liu GR (2007) Free and forced analysis using the smoothed finite element method (SFEM). J Sound Vib 301: 803–820
Dai KY, Liu GR, Nguyen-Thoi T (2007) An n-sided polygonal smoothed finite element method (nSFEM) for solid mechanics. Finite Elements Anal Des 43: 847–860
Dohrmann CR, Heinstein MW, Jung J, Key SW, Witkowski WR (2000) Node-based uniform strain elements for three-node triangular and four-node tetrahedral meshes. Int J Numer Methods Eng 47: 1549–1568
Liu GR (2008) A generalized gradient smoothing technique and the smoothed bilinear form for Galerkin formulation of a wide class of computational methods. Int J Comput Methods 5(2): 199–236
Liu GR, Dai KY, Nguyen-Thoi T (2007) A smoothed finite element method for mechanics problems. Comput Mech 39: 859–877
Liu GR, Li Y, Dai KY, Luan MT, Xue W (2006) A Linearly conforming radial point interpolation method for solid mechanics problems. Int J Comput Methods 3(4): 401–428
Liu GR, Nguyen-Thoi T, Dai KY, Lam KY (2007) Theoretical aspects of the smoothed finite element method (SFEM). Int J Numer Methods Eng 71: 902–930
Liu GR, Nguyen-Thoi T, Lam KY (2008) A novel alpha finite element method (αFEM) for exact solution to mechanics problems using triangular and tetrahedral elements. Comput Methods Appl Mech Eng 197: 3883–3897
Liu GR, Nguyen-Thoi T, Lam KY (2009) An edge-based smoothed finite element method (ES-FEM) for static, free and forced vibration analyses of solids. J Sound Vib 320: 1100–1130
Liu GR, Nguyen-Thoi T, Nguyen-Xuan H, Lam KY (2009) A node-based smoothed finite element method for upper bound solution to solid problems (NS-FEM). Comput Struct 87: 14–26
Liu GR, Zhang GY (2008) Upper bound solution to elasticity problems: a unique property of the linearly conforming point interpolation method (LC-PIM). Int J Numer Methods Eng 74: 1128–1161
Liu GR, Zhang GY, Dai KY, Wang YY, Zhong ZH, Li GY, Han X (2005) A linearly conforming point interpolation method (LC-PIM) for 2D solid mechanics problems. Int J Comput Methods 2(4): 645–665
Liu GR, Zhang GY, Wang YY, Huang HT, Zhong ZH, Li GY, Han X (2007) A linearly conforming point interpolation method (LC-PIM) for three-dimensional elasticity problems. Int J Numer Methods Eng 72: 1524–1543
Nguyen-Thanh N, Rabczuk T, Nguyen-Xuan H, Bordas S (2008) A smoothed finite element method for shell analysis. Comput Methods Appl Mech Eng 198: 165–177
Nguyen-Thoi T, Liu GR, Dai KY, Lam KY (2007) Selective smoothed finite element method. Tsinghua Sci Technol 12(5): 497–508
Nguyen-Thoi T, Liu GR, Lam KY, Zhang GY (2009) A face-based smoothed finite element method (FS-FEM) for 3D linear and nonlinear solid mechanics problems using 4-node tetrahedral elements. Int J Numer Methods Eng 78: 324–353
Nguyen-Thoi T, Liu GR, Nguyen-Xuan H, Nguyen-Tran C (2009) Adaptive analysis using the node-based smoothed finite element method (NS-FEM). Commun Numer Methods Eng. doi:10.1002/cnm.1291
Nguyen-Thoi T, Liu GR, Vu-Do HC, Nguyen-Xuan H (2009) A face-based smoothed finite element method (FS-FEM) for 3D visco-elastoplastic analyses of solid using tetrahedral mesh. Comput Methods Appl Mech Eng. doi:10.1016/j.cma.2009.07.001
Nguyen-Van H, Mai-Duy N, Tran-Cong T (2008) A smoothed four-node piezoelectric element for analysis of two-dimensional smart structures. CMES-Comput Model Eng Sci 23(3): 209–222
Nguyen-Xuan H, Bordas S, Nguyen-Dang H (2008) Addressing volumetric locking and instabilities by selective integration in smoothed finite elements. Commun Numer Methods Eng 25: 19–34
Nguyen-Xuan H, GR Liu, Nguyen-Thoi T, Nguyen-Tran C (2009) An edge–based smoothed finite element method (ES-FEM) for analysis of two–dimensional piezoelectric structures. Smart Mater Struct 18:065015 (12pp)
Nguyen-Xuan H, Liu GR, Thai-Hoang C, Nguyen-Thoi T (2009) An edge-based smoothed finite element method with stabilized discrete shear gap technique for analysis of Reissner–Mindlin plates. Comput Methods Appl Mech Eng (revised)
Nguyen-Xuan H, Rabczuk T, Bordas S, Debongnie JF (2008) A smoothed finite element method for plate analysis. Comput Methods Appl Mech Eng 197: 1184–1203
Nguyen-Xuan H, Nguyen-Thoi T (2009) A stabilized smoothed finite element method for free vibration analysis of Mindlin– Reissner plates. Commun Numer Methods Eng 25: 882–906
Tran Thanh Ngoc, Liu GR, Nguyen-Xuan H, Nguyen-Thoi T (2009) An edge-based smoothed finite element method for primal-dual shakedown analysis of structures. Int J Numer Methods Eng (revised)
Yoo JW, Moran B, Chen JS (2004) Stabilized conforming nodal integration in the natural-element method. Int J Numer Methods Eng 60: 861–890
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Nguyen-Thoi, T., Liu, G.R., Vu-Do, H.C. et al. An edge-based smoothed finite element method for visco-elastoplastic analyses of 2D solids using triangular mesh. Comput Mech 45, 23–44 (2009). https://doi.org/10.1007/s00466-009-0415-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00466-009-0415-2